NEW ICS - 576154 - 680ES- CONCRETE CHAINSAW w/ 12 GUIDEBAR & TWINMAX CHAIN

Description

Built to meet the operation and flexibility demands of the general construction user, the 680ES stands alone in terms of reliability and value. Easy to start with a new multifunction lever to control choke, run, and stop functions. The distinctive black powerhead houses specially designed carburetion and ignition systems that work together to ensure easy starting, cooler operation and dependable performance at just about any elevation.
Polyester air filter designed specifically for wet cutting
Operates TwinMAX™bar and chain consumables up to 14” (35cm)
Multifunction lever controls choke, throttle advance, run and stop modes
Extended drive sprocket adapter offers easy chain assembly
Deep cutting solution for obstructed or small openings
Cut squares as small as 4” x 4” (10 cm x 10 cm)
Easy-to-start in all weather
TECHNICAL SPECIFICATIONS
Engine Type
2-stroke, Air Cooled
Displacement
76.5 cc (4.7 cu-in)
Horsepower
3.7 kW (5 hp) @ 9,500 rpm
Torque
4.1 Nm (36.3 in-lbs) @ 6,500 rpm
Engine Speed
11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle)
Chain Speed at Maximum Power
34.5 m/s (6800 ft /min)
Weight
9.5 kg (21 lbs) powerhead only
Dimensions
46 cm (18 in) length / 29 cm (11.5 in) height / 25 cm (10 in) width
Starter
Dust and water resistant
Ignition
Special water resistant electronic ignition
Fuel ratio
2% (50:1) gasoline-to-oil
Fuel Capacity
0.88 liter (0.23 gallon)
Water Supply Requirement
Minimum: 1.5 bar (20 psi)
Water Flow Requirement
Minimum: 4 lpm (1 gpm)
Guaranteed Sound Power Level, Lwa (1)
117 dB(A) (Kwa=3.0 dB(A))
Equivalent Sound Pressure at the Operator's Ear Lwa
101.0 dB(A) (K = 2.0 dB(A))
Vibration, ahv eq Concrete Cutting (2)
7.2 m/s2 (K=1.0 m/s2) Front Handle/8.5 m/s2 (K=1.0 m/s2) Rear Handle