TPI 3.5KW 277V Packaged Duct Heater - 7PD351281

Description

Part of the company"s line of PD Series Packaged Duct Heaters, the TPI 3.5KW 277V Packaged Duct Heater 7PD351281 is guaranteed to deliver maximum heat and air flow through this low-maintenance piece of equipment.
This item is constructed with galvanized steel for its heating element rack, which features a 1 x .5-inch gap for insertion clearance during installations. It is also supplied with a galvanized steel compartment with a .5-inch fiberglass insulation and hinged cover. In addition, this duct heater runs on a 1-phase, 277-volt motor that delivers 3.5 kilowatts of power.
Furthermore, for added safety and protection, this packaged duct heater is equipped with a door interlock disconnect switch, primary automatic reset temperature limiting control, a load-carrying secondary over temperature protective device, a definite purpose magnetic contactor, a differential pressure fan interlock switch, and a step down control transformer for 24-volt power sources.
It also features a permanently attached wiring diagram on the inside of the terminal compartment cover for easy reference, which is really handy for anyone who would need to troubleshoot or manage the wiring.
Known as America"s Comfort Conditioning Company, TPI Corporation has been producing innovative and top-quality products for commercial and industrial uses for over 68 years. Purchase the TPI 3.5KW 277V Packaged Duct Heater 7PD351281 from Engineer Warehouse, an authorized distributor for TPI products and more.
PRODUCT HIGHLIGHTS:
Galvanized steel element rack: 1 inch shorter than duct height and .5-inch shorter than duct width to allow insertion clearance
Galvanized steel compartment with .5-inch fiberglass insulation and hinged cover
Door interlock disconnect switch
Primary automatic reset temperature limiting control
Load-carrying secondary over temperature protective device/s
Definite purpose magnetic contactor/s
Differential pressure fan interlock switch
Step-dn control transformer (24-volt)
Motor: 277 V, 1-phase power
Control steps: 1
Permanently attached wiring diagram on inside of terminal compartment cover
Made in the USA
Specifications
Overall Dimensions
8" L x 18.5" W x 25" D
Duct Dimensions
8" L x 12" W x 4.75" D
Weight
21 lbs
Voltage
277 V
Wattage
3.5 kW
Amps
12.6
Quantity
1
Manufacturer
TPI
Model Number
7PD351281
WARRANTY
: Backed by TPI Limited Official Warranty.
TPI Warranty
TPI Corporation provides a limited warranty of materials and workmanship for a period of (i) ten (10) years for Baseboard Elements, (ii) two (2) years for Thermostats and Controls, and (iii) twelve (12) months for all other products, with the warranty period commencing on the original date of purchase. The TPI warranty is limited to materials manufactured and work performed by TPI Corporation, and does not include damage or failure caused by acts of God, abuse, misuse, connected to or placed on other than rated voltage, abnormal usage, faulty installation, failure to follow suggested maintenance procedures enclosed with the product, improper maintenance or any repairs other than those provided by an authorized TPI Corporation service center. For the name of your nearest authorized TPI Corporation service center, please write to TPI Corporation, P.O. Box 4973, Johnson City, Tennessee, 37602 or call . During the warranty period, TPI Corporation will, at its sole option, repair or replace any defective parts or products returned, freight prepaid, to the TPI Corporation factory or such other location as TPI Corporation may designate. No parts or products will be accepted for repair or replacement without prior authorization from TPI Corporation and a return merchandise authority (RMA) number issued by TPI Corporation. Returned products must be packaged carefully and TPI Corporation shall not be responsible for damage in transit. When returning parts, the owner must provide the model number of the product and nature of difficulty being experienced. This warranty does not obligate TPI Corporation to bear the cost of labor in replacing any assembly, unit or component part thereof, nor does TPI Corporation assume any liability for secondary charges, expenses for installing or removal, freight or damages. There will be charges rendered for product repairs made after the warranty period has expired. Proof of purchase, including date, must accompany request for in-warranty service. This warranty gives you specific legal rights and you may have other rights, which may vary, from state to state.
EXCEPT FOR THE LIMITED WARRANTY PROVIDED IN THE FOREGOING PARAGRAPH, ALL PARTS AND PRODUCTS SOLD BY TPI CORPORATION ARE SOLD 'AS IS', 'WHERE IS', AND WITHOUT ANY OTHER WARRANTY OF ANY KIND OR NATURE, WHETHER EXPRESS, IMPLIED, OR STATUTORY AND INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF SPECIFIC PERFORMANCE OR MERCHANTABILITY.
UNDER NO CIRCUMSTANCES, EVEN WITH RESPECT TO CLAIMS COVERED BY THE FOREGOING WARRANTY, WILL TPI CORPORATION BE RESPONSIBLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE ARISING FROM OR RELATED TO THE PARTS OR PRODUCTS SOLD BY TPI CORPORATION.
In any event, TPI Corporation’s maximum liability shall not in any case exceed the PURCHASE price for the PART OR product claimed to be defective.
YOU HEREBY EXPRESSLY AGREE TO WAIVE ANY AND ALL RIGHTS TO A TRIAL BY JURY WITH RESPECT TO ANY PRODUCT MANUFACTURED OR SUPPLIED BY TPI CORPORATION.
Compare Similar Carts
Product
Brand
TPI
TPI
TPI
TPI
Price
8.99
54.99
57.99
9.99
Model Number
7PD351281
8PD5030163
PD4530163
4PD2020123
Overall Dimensions
8" L x 18.5" W x 25" D
16” L x 37.5” W x 50” D
16” L x 37.5” W x 46” D
12” L x 26.5” W x 26” D
Duct Dimensions
8" L x 12" W x 4.75" D
16” L x 30” W x 9.125” D
16” L x 30” W x 9.125” D
12” L x 20” W x 9.125” D
Amperes
12.6
139
108.4
24.1