U TUBE HEATER Commercial - Infrared - Natural Gas - 20 Ft Tube - 75,000 BTU

Description

Press to translate
Listing Translator by
Hindi
Portuguese
Thai
Korean
French
Chinese
Spanish
Arabic
Japanese
German
Russian
Italian
start_elivehelp_btncode
end_elivehelp_btncode
FREE SHIPPING OFFER
Free Shipping
within the
Lower 48 United States
. If you are located outside of the Lower 48 United States, please request a freight quote.
Model Number:
PTWBB59807
Condition:
New
Description:
U TUBE HEATER Commercial - Infrared - Natural Gas - 20 Ft Tube - 75,000 BTU
Features:
75,000 BTU - Natural Gas Fired - 20 Ft Long Tube (Overall Heater Length: 12.75 Ft) - Infrared - Aluminized Steel Combustion Chamber - Vacuum System Features Totally Enclosed Combustion Chamber- Direct or Indirect Vented Operation - CSA Certified, UL Listed - Made in the USA
Contact Us:
Phone (Toll Free): 1-
Email:
eBay mail or our customer service email
See similar items in our
eBay Store
This series of commercial/industrial u-tube type infrared heaters is available in 50,000 BTU to 175,000 BTU configurations.  Available in both Natural Gas and LP Propane setups.  Length ranges from 20 Ft to 50 Ft
Description & Specification:
Industrial/Commercial Natural Gas Fired U-Tube Heater - 75,000 BTU - 20 Ft Long
Tube (Overall Heater Length: 12.75 Ft)
Our USA made infrared u-tube heaters provide efficient uniform radiant energy distribution.  U-tube heaters are recommended for high heat loss areas including loading docks and commercial/industrial buildings where doors are constantly open
Reliable direct spark ignition and 100% gas shut-off safety control
Up to 50 Ft of ducting-in fresh air and 75 Ft sidewall venting capability
Vacuum system features a totally enclosed combustion chamber
Commercial grade heavy duty draft inducer assembly features permanently lubricated totally enclosed ball bearing motor for maintenance free operation
Highly efficient aluminum reflectors
Includes diaphragm air switch, heavy duty cast iron burner and burner inspection site glass and diagnostic monitoring light system
Aluminized steel combustion chamber makes our line of u-tube heaters ideal for corrosive environments
Heater Type: Infrared - U-Tube - Commercial/Industrial
Fuel Requirement: Natural Gas (NG)
BTU Rating: 75,000
Current Rating: 120V, 60 Hz, 1 Phase, 2.6 Amp
Length of Heater Tube: 20 Ft
Overall Length of Heater: 12.75 Ft
Venting: Direct or indirect venting.  75 Ft sidewall venting and 50 Ft outside air combustion capability
Ignition: Direct spark
Safety Controls: 100% gas shut off
Clearance to Combustibles - Side: 24"
Clearance to Combustibles - Ceiling: 6"
Clearance to Combustibles - Below: 60"
Clearance to Combustibles - End: 52"
Mounting: Horizontal or angle mounting up to 45º
Gas Pipe Connection: 1/2" MPT male
Tube Diameter: 4"
Flue Connection: 4" Round
Fresh Air Connection: 6" Round
Includes 36" stainless steel flexible gas connector
Optional thermostats available - see Optional Items below
Certifications & Approvals: CSA Design Certified - UL Listed - ANSI Z83.20 Compliant
Optional Item:
Model PT109165
- Line Pressure Regulator - Heavy duty, corrosion-resistant construction.  Equipped with vent-limiting device.  Does not require venting
-
Please inquire: Toll Free
Optional Item:
Model PT109168
- 4" Sidewall or Roof Venting Cap - Can be used in sidewall or through-the-roof venting systems -
Please inquire: Toll Free
Optional Item:
Model PT109169
- 4" Combustion Air Cap - Used for combustion air or freish air duct termination.  Aluminum construction.  Fits Type B or single wall flue pipe -
Please inquire: Toll Free
Optional Item:
Model PT108118
- 120/240V - Programmable Digital Line Voltage Thermostat
- Features separate programs for weekdays and weekends with up to 4 settings per day.  This is a hardwire thermostat -
Please inquire: Toll Free
Optional Item:
Model PT28795
- 4" Vertical Venting Kit - for direct venting of combustion by-products.  Includes three 24" pipe lengths, one 12" "L" pipe length, increaser, roof flashing, storm collar, roof cap, 90º elbow and draft hood connector.  Additional lengths of pipe available -
Please inquire: Toll Free
Optional Item:
Model PT29794
- 4" Horizontal Venting Kit - for direct venting of combustion by-products.  Includes three 24" pipe lengths, one 12" straight pipe, one appliance adapter, one horiztonal termination cap, one wall thimble, two 45º elbows and draft hood connector.  Additional lengths of pipe available -
Please inquire: Toll Free
Please allow 2 weeks for delivery - this heater is built to order
Overall Dimensions: 153" L x 31" W x 6.25" H
Weight: 117 Lbs
1 Year Warranty (Includes Parts & Labor)
Made in the U.S.A.
Shipping Terms
Shipping and Handling:
FREE
within the Lower 48 United States
.
All other locations, please contact us for a shipping quote.
Shipping Insurance:
All of our products are shipped 100% insured against damage and loss.  If you receive a damaged product, please let us know by email and we will arrange for the product to be picked up at the address that it was delivered to.  We will pay shipping to have the item returned to our facility.  Once we have received the item back, we will ship a replacement immediately, provided stock is available.
Warranty and Return Policy
All of our products are sold with at least a
One Year Manufacturer's Warranty
.  If you receive an item that becomes inoperative within the manufacturer's warranty period, you will be required to exercise your warranty directly with the manufacturer for the repair or replacement of the product.  We will not accept product returns which are covered by a manufacturer's warranty.
Feedback Policy
We want you to be completely satisfied with your purchase and have a pleasant buying experience with us on eBay.  We highly value our outstanding eBay feedback reputation.  If anything about your transaction is not to your satisfaction, please contact us
BEFORE
leaving feedback, inform us of the issue, and we will do our best to resolve the situation to your satisfaction in an effort to earn a positive feedback.  Due to our business systems and processes, we leave feedback after receiving feedback from you, our valued customers.  We believe this process ensures good communication and problem resolution in advance of posting permanent feedback.